Scroll down to the Wireless Security Mode and select WPA-2.Once logged in to the Admin Panel, go to Wireless Settings > Manual Wireless Network Setup.Log in to the Admin Panel of your D-Link router by following the method mentioned above.After the SSID is changed, all the previously connected devices will be disconnected and you will have to connect to the network again from those devices.

Click on Save Settings to change the SSID.

Next to the Wireless Network Name/SSID field, enter your new SSID.

Once you’re inside the admin panel, go to Wireless Settings and click on Manual Wireless Network Setup.

Log in to the Admin Panel of your D-Link router by following the aforementioned method.To change your D-Link SSID through the Admin Panel of the router, follow these steps: Once you are logged in, all the settings of your router and your WiFi network can be changed from there.Enter the login credentials and log in to your D-Link Router.You can also search on the internet for the default login credentials of your router model. You can find the default login credentials of your router on a label at the side or back of your router. If you have not changed the admin login username and password then you can log in using the default credentials.

By default, the username is admin and a password is not required.

You will be taken to the login page of your D-Link Router and to continue, you will have to enter the login username and password.

Alternatively, you can also type the following links instead of the default gateway address or

In the address bar of the web browser, type 192.168.0.1or 192.168.1.1 and press Enter.

Once connected, on your PC, open a web browser.

Here is how you can log in to your D-Link Router’s Admin Panel and make changes to your WiFi settings: You just need to connect to the router, an active internet connection is not required. First of all connect your PC/Laptop to D-Link Router either through the WiFi network or using an Ethernet cable.

D link router dsl 2730u firmware